Stabilize boiler mapping and clutch fail-safe

README.md

@@ -39,13 +39,15 @@ eine Campfire- oder Blaze-Burner-Waermequelle erkannt wird.
 
 ### Clutch-Teststeuerung
 
-Die rechte Seite des Computers ist als direkter Redstone-Ausgang fuer eine Test-Clutch
+Die linke Seite des Computers ist als Redstone-Ausgang fuer die Test-Clutch konfiguriert.
-konfiguriert. Der Touch-Button auf dem Advanced Monitor schaltet diesen Ausgang ohne
+Zwischen Ausgang und Clutch sitzt eine Redstone-Fackel als Fail-safe-Inverter: Ausgang `ON`
-Invertierung zwischen `CLUTCH SIGNAL: OFF` und `CLUTCH SIGNAL: ON` um. Die Verbindung kann
+bedeutet `PRODUCTION: RUNNING`; Ausgang `OFF`, Programmabbruch oder Computerneustart bedeutet
-direkt mit Redstone oder drahtlos ueber ein abgestimmtes Paar Create Redstone Links erfolgen.
+`PRODUCTION: STOPPED`. Die Verbindung kann direkt oder ueber Create Redstone Links erfolgen.
-Die Boiler-Zuordnung erfolgt nach den internen Peripheral-Namen; die drei Block Reader sollten
+
-deshalb in der Reihenfolge Boiler 1 bis 3 an das Wired Network angeschlossen werden. Jeder Block
+Die Boiler werden nicht anhand wechselnder Peripheral-Namen, sondern fest ueber ihre
-Reader muss auf den Controller-Tank des zugeordneten Boiler-Multiblocks zeigen.
+Controller-Koordinaten `11266/64/10810`, `11260/64/10810` und `11252/64/10810` zugeordnet.
+Fehlt ein Reader, bleibt dadurch exakt die betroffene Boiler-Zeile auf `MISSING / NO READER`.
+Jeder Block Reader muss direkt auf den Controller-Tank seines Boiler-Multiblocks zeigen.
 
 ## Struktur
 

create_boiler_display.lua

@@ -1,11 +1,16 @@
 -- Create boiler status board for CC:Tweaked.
 -- All Create values are read through Advanced Peripherals Block Readers.
 
-local EXPECTED_BOILERS = 3
 local REFRESH_SECONDS = 1
 local MIN_WIDTH = 38
 local MIN_HEIGHT = 14
-local CLUTCH_OUTPUT_SIDE = "right"
+local CLUTCH_OUTPUT_SIDE = "left"
+
+local BOILERS = {
+  { label = "BOILER 1", position = { 11266, 64, 10810 } },
+  { label = "BOILER 2", position = { 11260, 64, 10810 } },
+  { label = "BOILER 3", position = { 11252, 64, 10810 } },
+}
 
 local clutchButton = { x1 = 0, x2 = 0, y = 0 }
 
@@ -64,6 +69,13 @@ local function samePosition(a, b)
     and tonumber(a[3]) == tonumber(b[3])
 end
 
+local function positionKey(position)
+  if type(position) ~= "table" then return nil end
+  local x, y, z = tonumber(position[1]), tonumber(position[2]), tonumber(position[3])
+  if not x or not y or not z then return nil end
+  return ("%d,%d,%d"):format(x, y, z)
+end
+
 local function discoverReaders()
   local boilers, networks = {}, {}
   local names = peripheral.getNames()
@@ -78,7 +90,9 @@ local function discoverReaders()
         local speed = getValueIgnoringCase(data, { "Speed" })
 
         if type(boiler) == "table" then
-          boilers[#boilers + 1] = { name = name, data = data, boiler = boiler }
+          local position = getValueIgnoringCase(data, { "LastKnownPos", "Controller" })
+          local key = positionKey(position)
+          if key then boilers[key] = { name = name, data = data, boiler = boiler } end
         elseif type(network) == "table" and tonumber(speed) then
           networks[#networks + 1] = { name = name, data = data, network = network }
         end
@@ -136,8 +150,10 @@ end
 
 local function drawClutchButton(height)
   local width = monitor.getSize()
-  local signal = redstone.getOutput(CLUTCH_OUTPUT_SIDE)
+  -- With the external redstone-torch inverter, output ON means the clutch is
-  local label = signal and " CLUTCH SIGNAL: ON " or " CLUTCH SIGNAL: OFF "
+  -- unpowered and production runs. Output OFF is the fail-safe stopped state.
+  local running = redstone.getOutput(CLUTCH_OUTPUT_SIDE)
+  local label = running and " PRODUCTION: RUNNING " or " PRODUCTION: STOPPED "
   local x = math.max(1, math.floor((width - #label) / 2) + 1)
   local y = math.max(13, height - 1)
 
@@ -149,15 +165,15 @@ local function drawClutchButton(height)
   monitor.setBackgroundColor(colors.black)
   monitor.write((" "):rep(width))
   monitor.setCursorPos(x, y)
-  monitor.setBackgroundColor(signal and colors.orange or colors.gray)
+  monitor.setBackgroundColor(running and colors.lime or colors.red)
   monitor.setTextColor(colors.black)
   monitor.write(label)
   monitor.setBackgroundColor(colors.black)
 end
 
-local function toggleClutchSignal()
+local function toggleProduction()
-  local signal = redstone.getOutput(CLUTCH_OUTPUT_SIDE)
+  local running = redstone.getOutput(CLUTCH_OUTPUT_SIDE)
-  redstone.setOutput(CLUTCH_OUTPUT_SIDE, not signal)
+  redstone.setOutput(CLUTCH_OUTPUT_SIDE, not running)
 end
 
 local function render()
@@ -169,9 +185,10 @@ local function render()
   monitor.clear()
   center(1, "CREATE KRAFTWERK", colors.cyan)
 
-  for index = 1, EXPECTED_BOILERS do
+  for index, configuredBoiler in ipairs(BOILERS) do
-    local state, heatMode, color = readBoiler(boilers[index])
+    local reader = boilers[positionKey(configuredBoiler.position)]
-    center(2 + index, ("BOILER %d  %-7s  %s"):format(index, state, heatMode), color)
+    local state, heatMode, color = readBoiler(reader)
+    center(2 + index, ("%s  %-7s  %s"):format(configuredBoiler.label, state, heatMode), color)
   end
 
   center(7, "MAIN SHAFT", colors.cyan)
@@ -187,7 +204,7 @@ local function render()
   end
 
   drawClutchButton(height)
-  center(height, "Touch = Redstone umschalten", colors.gray)
+  center(height, "Touch = Produktion umschalten", colors.gray)
   monitor.setTextColor(colors.white)
   monitor.setBackgroundColor(colors.black)
   term.setCursorPos(1, 1)
@@ -206,16 +223,24 @@ end
 safeRender()
 local refreshTimer = os.startTimer(REFRESH_SECONDS)
 
+local function run()
   while true do
-  local event, first, second, third = os.pullEvent()
+    local event, first, second, third = os.pullEventRaw()
-  if event == "timer" and first == refreshTimer then
+    if event == "terminate" then
+      return
+    elseif event == "timer" and first == refreshTimer then
       safeRender()
       refreshTimer = os.startTimer(REFRESH_SECONDS)
     elseif event == "monitor_touch" then
       local x, y = second, third
       if y == clutchButton.y and x >= clutchButton.x1 and x <= clutchButton.x2 then
-      toggleClutchSignal()
+        toggleProduction()
         safeRender()
       end
     end
   end
+end
+
+local ok, reason = pcall(run)
+redstone.setOutput(CLUTCH_OUTPUT_SIDE, false)
+if not ok then error(reason, 0) end